AB386A
The ideal control for program-controlled system with heavy sewing machine heads with 1:1 timing belt drive
Functions and usable motors
- Can be controlled and programmed by an RS485 interface
- Communication handling according to ISO 1745
- Direction of rotation and speed profile can be controlled online
- Combined operation by pedal / computer is possible
- Additional hardware bus for time-critical signals Control and error status signals
- Bidirectional RS485
- Baud rate can be selected (125.000, 41.667, 31.250, 9.600 kBaud)
- 1 start bit, 8 data bits, 1 stop bit, no parity bit
- Protocol according to ISO 1745
- ASCII data transfer
- Position 1 signal - for stitch counting
- Generator signal - 512 impulses / rotation - for stepping motor control, etc.
- Reset input - for the synchronization or the defined reset of the control
- 2 bidirectional interrupt lines - for time-critical operations
- Pedal operation with actuator EB301
- Operation with timing belt
- Motor: DC1550