SPRACHE etc.
  • DC1230_1B2A0270_EN.jpg

  • 1B2A0297

  • DC1210_1B2A0304_EN.jpg

  • 1B2A0903

  • IMG_1554_EN_v2.jpg

AB386C

The ideal control for program-controlled system with heavy sewing machine heads with standard V- belt drive


Functions and usable motors

  • Can be controlled and programmed by an RS485 interface
  • Communication handling according to ISO 1745
  • Direction of rotation and speed profile can be controlled online
  • Combined operation by pedal / computer is possible
  • Additional hardware bus for time-critical signals Control and error status signals
  • Bidirectional RS485
  • Baud rate can be selected (125.000, 41.667, 31.250, 9.600 kBaud)
  • 1 start bit, 8 data bits, 1 stop bit, no parity bit
  • Protocol according to ISO 1745
  • ASCII data transfer
  • Position 1 signal - for stitch counting
  • Generator signal - 512 impulses / rotation - for stepping motor control, etc.
  • Reset input - for the synchronization or the defined reset of the control
  • 2 bidirectional interrupt lines - for time-critical operations
  • Pedal operation with actuator EB301
  • Motor: DC1550

DC1550