For this
control boxes you have to take care during the update. If the memory stick is
damaged or there is a power off during update the control box is empty!
In that case
you have download software by IF232-USB cable and EfkaLoader software!
Update by usb memory stick (FAT/FAT16 format, smaller
4GB):
1.
copy and extract the file to an empty
usb memory stick (direct on the root, no subfolder!)
2.
power off control box
3.
plug usb memory stick to control box
4.
enter parameter menu with code number
(-link) and go to parameter .5.2.7.
5.
Press “E” key, you will see “hdl_”.
Press “>>” key to see the file name. Select the correct file by pressing
“+” and “-“ key. Press “E” key two times.
|
Control Box Type |
Files |
|
AB221A
Y1-Y6
1) |
5131L_14030407 -link |
|
AB221A Y7,Y8,… 1)3) |
5132C_18112608 -link |
|
AB321A Y1-Y3 1) |
5231L_14030407 -link |
|
AB321A Y4,Y5,… 1) 3) |
5232C_18112608 -link |
|
AB425S 2) |
5850S_18030809 -link |
|
DA321G Y1-Y4 1) |
5321V_15011916 -link |
|
DA321G Y5,Y6,… 1)
3) |
5325B_18091113 -link |
|
PF321A |
6012C_10101109 -link |
1)You
have to check the hardware version before you update the control box. When you
update by usb memory stick you can only see the correct files because of file
ending.
2)Sometimes
after download new software you see “PROG” in the display. Please wait until
message disappears. When ready you will see B3 (Update FAIL) or B4 (Update OK)
message.
3)
The hardware for AB221A, AB321A and DA321G changed:
5131 ->
5132
5231 ->
5232
5321 ->
5325
The processor
is different. To activate 15V on B18 you have no jumper you have to change a
parameter. There is no jumper anymore.
-ABxxxA
control box parameter F362=1 to activate 15V on B18
-DAxxxG
control box parameter F375=1 to activate 15V on B18
When you used
an old hardware for your machine we recommend to test everything with the new
hardware to ensure that everything works!